speed sensor - turbo muin smart b+

[dkrieber]

Hi,
I just got the turbo muin smart b+ and try to set it up with my Garmin 810. I really dont find the measurements given from the Misuro very accurate. cadence constantly shift +-10 rpm, same with Watt) I use my garmin cadence sensor instead and there is no problem with cadence measurement. Now I have problem with the speed. It is ridicules low, like around 0,5 km/h. I made a test ride for 45 mins. and all I got was "moving" was around 200 meters
What is wrong with the speed?

[Elite Admin S]

Hi

Are you sure to have put the correct circumference value? For example, if your trainer serial number is higher than 30000, you have to put a circumference value of : circumference/13.2

Please check this table and be sure to have put the proper value (third column, non elite app/devices - connection as a speed/cadence sensor):

https://drive.google.com/open?id=0By4rZ ... 2kwUC1tUzg

Regards

[dkrieber]

hi,

yes, serial number is +50000. Circumference is set to 158 mm in the Garmin.

[dkrieber]

so what now? any answer?

[Elite Admin S]

Sorry for the delay, as written in the regulation of the forum we cannot answer daily here (if you need a quick answer, I suggest you to contact the customer care directly).

The circumference is correct. It is necessary to investigate further.
Please contact the customer care at real@elite-it.com and the guys there will help you to find the cause of the issue

Regards

[frodeasen]

if u change to 8,8 instead u get more ok speed as if u ride a all flat stage, it almost match stravas flat courses with speed and distance

2096/8,8